Technical data
Everlite Enduro panel data

Material: PVC-u
Design: 3-layer, 2 chamber
UV protection: Co-extruded invisible UV layer
Dimensions: 265.5mm (w) x 60mm (h)
Drip nose: 50mm
Thermal value: 1.85 (Wm2K)
Free span: 4m
Pitch: 2.5 degrees (using width pack), 5+ degrees (without width pack)
Lengths available: 2m, 2.5m, 3m, 3.5m, 4m, 5m & 6m

• Everlite Enduro kits feature ultrasteel locking bars. The bars offer a free span capability of 4m and provide exceptional strength.
• Enduro achieves a U-value of 1.85W/m2K – offering better thermal insulation than standard double-glazed units.
• The panel system was tested in accordance with BS476: Part 3:1958. The method of test used for all roofing materials.

Requirements B4 of schedule 1 to the Building Regulations 1991 states:

“The roof of the building should resist the spread of fire over the roof and from one building to another, having regard to the use and position of building”.

• Approved Document B, Section 14 recognises the use of plastics and sets out limitations on their use in Table 18.
• The PVC-u Everlite panel system achieved a Class 2 fire rating when tested in accordance with BS476: Part 7 and as a result cannot be classified as TP (a) rigid and would be subject to the limitations of a TP (b) material.